Guide Bar:Guides the chain. Typical length from 12" to 48"
(Chain Saw Parts) |
|
Air Filter:Replaceable cartridge
(Chain Saw Parts) |
|
Fuel Filler Cap:none
(Chain Saw Parts) |
|
Throttle Lever Lock:Locks the throttle for starting
(Chain Saw Parts) |
|
Ignition Switch:none
(Chain Saw Parts) |
|
Choke Lever:Chokes the carburetor allow for a richer fuel mixture for starting.
(Chain Saw Parts) |
|
Spark Plug Wire:Carries current to the spark plug
(Chain Saw Parts) |
|
Spark Plug:Ignites the fuel air mixture
(Chain Saw Parts) |
|
Throttle Trigger:Operates the engine throttle (in the handle)
(Chain Saw Parts) |
|
Oil Filler Cap:none
(Chain Saw Parts) |
|
Chain Saw File:A round file used to sharpen chains
(Chain Saw Parts) |
|
Brake Lever:Stop the saw blase in the event of a kick back toward the operator.
(Chain Saw Parts) |
|
Chain Saw Chain:The "blade" of a chain saw. Fits on the guide bar. Chains come in a variety of different tooth designs and are sized for the length of the guide bar.
(Chain Saw Parts) |
|
Starter Grip:Attached to the end of the starter rope
(Chain Saw Parts) |
|
Talley Sheet:Use to tally logs
(Equipment ID) |
|
Data Recorder:
(Equipment ID) |
|
Diameter Tape:Tape with a scale the reads the tree diameter when measuring the circumference.
(Equipment ID) |
|
Dibble Bar:A tool used to create hole for planting trees
(Equipment ID) |
|
Dixie Pike Pole:Used for moving logs
(Equipment ID) |
|
Dot Grid:
(Equipment ID) |
|
Drip Torch:Use to light back fires
(Equipment ID) |
|
Fusee:Use to light back fires.
(Equipment ID) |
|
Forester's Hand Compass:A handheld compass used for field work.
(Equipment ID) |
|
Scaling Stick:Use to scale (measure) logs
(Equipment ID) |
|
Ear Protectors:Provide hearing protection. Worn in mills and around equipment.
(Equipment ID) |
|
Cruiser's Stick:A measuring stick held at arm's length to measure tree height and diameters. (Builtmore Stick)
(Equipment ID) |
|
Fixed Radius Plot Tape:
(Equipment ID) |
|
Choker:A cable place around a log to haul it to a landing.
(Equipment ID) |
|
Leveling Rod:A graduated rod used with a level to measure land elevation
(Equipment ID) |
|
Fire Rake:Used to stop the edge of a fire
(Equipment ID) |
|
Engineer's Tape:Graduated?
(Equipment ID) |
|
Dumpy Level:A survey instrument limited level sighting.
(Equipment ID) |
|
Wedge - Splitting:A steel wedge used to split logs.
(Equipment ID) |
|
Abney Level:A hand held level.
(Equipment ID) |
|
Altimeter:Used to measure elevation. Use the barometric pressure.
(Equipment ID) |
|
Anemometer:Used to measure wind speed. Can be handheld or mast mounted.
(Equipment ID) |
|
Axe - Cruiser's:A small single bit axe with a long handle.
(Equipment ID) |
|
Ax - Double Bit:A large axe with two sharp faces. Used primarily for cutting.
(Equipment ID) |
|
Ax - Hand:A small axe or hatchet with a short handle.
(Equipment ID) |
|
Axe - Single Bit:A large axe with a single sharp face. Used for cutting and splitting.
(Equipment ID) |
|
Back Pump:A tank that is carried on the back with a hand pump for fighting fire.
(Equipment ID) |
|
Bark Gauge:Used to measure bark thickness.
(Equipment ID) |
|
Tree or Pole Climbers:Attached to the boots and lower legs used for climbing trees. Gaffs (spikes) are longer for tree use since they must penetrate the bark.
(Equipment ID) |
|
Wedge Prism:Used to determine basal area
(Equipment ID) |
|
Cross cut Saw:A course tooth saw used for cutting logs. One or two man styles are available.
(Equipment ID) |
|
Wedge - Falling:A plastic wedge that is placed in the saw cut to keep the blade from pinching and lever the tree during felling.
(Equipment ID) |
|
Tree Planting Bag:Bag worn but tree planters to hold bare root trees.
(Equipment ID) |
|
Chaps:Protective chaps used to prevent injury from chain saws.
(Equipment ID) |
|
Flagging Tape:Plastic tape that comes in many colors. Used to mark boundaries, trail maintenance, etc.
(Equipment ID) |
|
Clinometer:An instrument that measure slope or angles. Used to measure tree height.
(Equipment ID) |
|
GPS - Hand Held:Used for mapping and data collection.
(Equipment ID) |
|
Tree Marking Gun:A hand held pump that attaches to a can of marking paint. Used to mark trees (most often for cutting).
(Equipment ID) |
|
Tree Injector:A device for injecting chemicals into trees.
(Equipment ID) |
|
Tree Caliper:A tool used to measuring tree diameters (small trees)
(Equipment ID) |
|
Brand Hammer:A heavy hammer that is used to place an indented brand on the end of a log.
(Equipment ID) |
|
Hookeroon:Used to pull slabs of wood off of the mill.
(Equipment ID) |
|
Logger's Tape:Use in timber cruising, scaling, and to measure log length for cutting. It has a spike in the end to hold it to the log.
(Equipment ID) |
|
Soil Tube:A probe for taking soil samples.
(Equipment ID) |
|
Stereoscope:A device for looking at a pair of aerial photos that produces a 3D effect.
(Equipment ID) |
|
Jacob's Staff:Used to hold a staff compass.
(Equipment ID) |
|
Plumb Bob:Used to measure vertical or "plumb".
(Equipment ID) |
|
Increment Borer:This tool bores into a tree and removes a small core. Used to count tree rings in a live tree.
(Equipment ID) |
|
McLeod:Used to make a fire break. The rakes side us is used to remove duff and the hoe side to scrape to bare earth.
(Equipment ID) |
|
Splitting Maul:A wedge shaped maul used to split wood.
(Equipment ID) |
|
Range Finder:Used to measure distance (range).
(Equipment ID) |
|
Surveying Pins:Survey pins (or Surveyor's arrows) and metal pins used to mark the end of the tape when measuring distance with to people.
(Equipment ID) |
|
Staff Compass:A compass that is mounted on a pole with sights.
(Equipment ID) |
|
Sling Psychrometer:Used to measure relative humidity. (Important when assessing fire conditions.)
(Equipment ID) |
|
Pulaski:A fir fighting tool with an axe head and an adze head. (Also called a fire axe.)
(Equipment ID) |
|
Hoedad:Used for tree planting.
(Equipment ID) |
|
Sledge (or Single Jack):A small sledge hammer commonly 2-4 pounds.
(Equipment ID) |
|
Safety Hard Hat:PPE worn in the woods to protect you from falling debris.
(Equipment ID) |
|
Hazel Tool:A special hoe tool used for fire fighting. It is designed for conditions where heavy trenching and grubbing is required. Cuts easily through vine grape, swamp, maple, and deep ground litter.
(Equipment ID) |
|
Peavy:A tool used for turning logs.
(Equipment ID) |
|
Shovel:For fire fighting. Typically has more angle than a standard round nose shovel so it can be used for scraping. Edges are commonly sharpened so it can be used to cut small limbs.
(Equipment ID) |
|
Relaskop:Used to measure tree height, diamter, and basal area.
(Equipment ID) |
|
Processor:Used to cut logs to length.
(Heavy Equipment) |
|
Logging Helicopter:Helicopters are used to move logs where skidders are not practical.
(Heavy Equipment) |
|
Skidder:Skidders are used to move (drag) logs to a landing
(Heavy Equipment) |
|
Yarder:Yarders are used to drag logs to a landing in steep terrain.
(Heavy Equipment) |
|
Self Loading Log Truck:A log truck with a mounted grapple that load logs into the bunks.
(Heavy Equipment) |
|
Dozer:A track tractor with a blade mounted in the front. Used to make fire breaks and make water bars on skid trails.
(Heavy Equipment) |
|
Feller-Buncher:The feller-buncher is used to harvest smaller tress.
(Heavy Equipment) |
|
Rubber Tire Loader:Used to move and load logs at a landing.
(Heavy Equipment) |
|